This is Korea's representative smart door lock that obtained KS national certificate for the first time in Korea's smart door lock industry. In addition, we are conducting an advanced test process with an internal standard which is higher than the KS standard.
Dead bolt & Handle Abuse Test
In order to secure more safety of the door lock, we take strict tests of Dead bolt Lateral Pressure/Push-in, Handle Vertical Load/Tensile Load, essentially with company’s own standard which is higher than KS one.
| Test | KS/KC Standard | Company’s Standard |
|---|---|---|
| Mortise Lateral Pressure / Push-in |
2,451N / 1,470N | Lateral Pressure : 2,940N / Push in : 1,764N |
| Dead bolt Lateral Pressure | 2,451N | 2,940N |
| Dead bolt Push-in | 1,470N | 1,764N |
| Handle Vertical Load / Tensile Load(Mortise Lock) |
Each 2,451N | Tensile Load : 2,940N / Tensile Load : 2,940N |
External Impact Test
This test is to ensure complete quality through drop and external strength test to prepare for mechanical and physical impacts from the outside.
| Test | KS/KC Standard | Company’s Standard |
|---|---|---|
| Drop Test | Freefall 540g steel ball from 1.3m height to the product and no problem with its function | Test same standard with KS and give impact on (inside/outside) five sides additionaly |
Open/Close Test
Durability life test is carried out for various operating parts for keeping reliable quality.
| Test | KS/KC Standard | Company’s Standard | |
|---|---|---|---|
| Outer Body | Button Key operating | 20,000 times | 30,000 times |
| RF Key operating | 40,000 times | 50,000 times | |
| Inner Body | Inner Handle operating | 40,000 times | 50,000 times |
| Total | 100,000 times | 130,000 times | |
Electrostatic and Electrical Impact Tests
Test normal electrostatic as well as electrical impact(Max. 30kV) from out side to avoid a forced intrusion. (Prevention of the source defensive circuit embedded)
| Test | KS/KC Standard | Company’s Standard |
|---|---|---|
| Electrostatic | 20 repeated discharges per second in motion (Min. 10 times single discharge) 1 Metallic Part-Contact 8kV Nonmetallic part-Noncontact 15kV No malfunction or No loss of function | 20 repeated discharges per second in motion (Min. 20times single discharge) 1 Metallic Part-Contact 8kV Nonmetallic part-Noncontact 15kV No malfunction or No loss of function |
| Electrical Impact | 200times consecutive 10Hz cycles(20 sec.) at outer body with locked state. 3 Metallic Parts-Contact 25kV 3 Nonmetallic parts-Noncontact 30kV Must not be opened | 200times consecutive 10Hz cycles(20 sec.) at outer body with locked state 5 Metallic parts-Contact 25kV 5 Nonmetallic parts-Noncontact 30kV Must not be opened |